192If the live view selector is rotated to 1, the i-button menu will containthe items listed below. Microphone sensitivity, Frequencyresponse, Wind noise reduction, and Highlight display can beadjusted while recording is in progress.Option DescriptionImage area Choose from the DX (24×16) and 1.3× (18×12)image areas (0 168).Frame size/frame rate Select a frame size and rate (0 166).Movie quality Choose movie quality (0 166).MicrophonesensitivityPress 1 or 3 to adjustmicrophone sensitivity.Both the built-in andoptional stereomicrophones are affected.FrequencyresponseControl the frequency response of the built-inmicrophone or optional stereo microphones (0 274).Wind noisereductionEnable or disable wind noise reduction using thebuilt-in microphone’s low-cut filter (0 274).Set Picture Control Choose a Picture Control (0 130). The Clarityparameter does not apply to movies.Destination When two memory cards are inserted, you can choosethe card to which movies are recorded (0 273).MonitorbrightnessPress 1 or 3 to adjustmonitor brightness for liveview (note that this affectslive view only and has noeffect on photographs ormovies or on the brightnessof the monitor for menus orplayback; 0 191).
