Nilfisk-Advance SC500 9087352020 Instructions For Use Manual

Nilfisk-Advance SC500 9087352020 Instructions For Use Manual Manual pdf 6 page image

ENGLISH INSTRUCTIONS FOR USE4 SC500 - 909998000011/2014SYMBOLS THAT APPEAR ON THIS MANUALDANGER!It indicates a dangerous situation with risk of death for the operator.WARNING!It indicates a potential risk of injury for people.CAUTION!It indicates a caution or a remark related to important or useful functions.Pay careful attention to the paragraphs marked by this symbol.NOTEIt indicates a remark related to important or useful functions.CONSULTATIONIt indicates the necessity to refer to the Instructions for use Manual before performing any procedure.GENERAL INSTRUCTIONSSpecific warnings and cautions to inform about potential damages to people and machine are shown below.DANGER!– Before performing any maintenance, repair, cleaning or replacement procedure, remove the ignition key anddisconnect the battery connector.– This machine must be used by properly trained operators only.– Do not wear jewels when working near electrical components.– Do not work under the lifted machine without supporting it with safety stands.– Do not operate the machine near toxic, dangerous, flammable and/or explosive powders, liquids or vapors:This machine is not suitable for collecting dangerous powders.– When using lead (WET) batteries, keep sparks, flames and smoking materials away from the batteries. Duringthe normal operation explosive gases are released.– When using lead (WET) batteries, battery charging produces highly explosive hydrogen gas. During batterycharging, lift the recovery tank and perform this procedure in well-ventilated areas and away from nakedflames.WARNING!– Carefully read all the instructions before performing any maintenance/repair procedure.– The machine ignition key has a built-in magnet. Do not place objects having magnetic bands (such as creditcards, electronic keys, phone cards) near the key. The built-in magnet can damage or erase the data storedon the magnetic bands.– Before using the battery charger, ensure that frequency and voltage values, indicated on the machine serialnumber plate, match the electrical mains voltage.– Do not pull or carry the machine by the battery charger cable and never use the battery charger cable asa handle. Do not close a door on the battery charger cable, or pull the battery charger cable around sharpedges or corners. Do not run the machine on the battery charger cable.– Keep the battery charger cable away from heated surfaces.– Do not charge the batteries if the battery charger cable or the plug are damaged.– To reduce the risk of fire, electric shock, or injury, do not leave the machine unattended when it is pluggedin. Before performing any maintenance procedure, disconnect the battery charger cable from the electricalmains.– Do not smoke while charging the batteries.– To avoid any unauthorized use of the machine, remove the ignition key.– Do not leave the machine unattended without being sure that it cannot move independently.https://harrissupplyind.com - To Order Parts Call 608-268-8080