NiteRider LUMINA 40 Installation Manual
                                        | |
Contents
| 
Lumina 40 System7SYSTEM SYSTEM tab page AccessChange passwordAdvancedModeSetting of a password to protect advanced user settings (option More) from use bynon-authorised users.• The password must contain four numbers.• Enter code 1111 to deactivate the password protection.• When the correct password has been entered, all user screens can be accessed.• The system will request the password again, if the controller is not used for a fewminutes.Change passwordEditMode.Setting of a password so that only authorised users can change the user settings.• The password must contain four numbers.• Enter code 1111 to deactivate the password protection.• If you have entered a password different to 1111, the control computer will requestthe password when you try to change a setting. After you have entered the correctpassword, the setting can be changed.• The system will request the password again, if the controller is not used for a fewminutes.4.2 SD Card MenuThe set data and the operating program in the control computer can be transferred to an SD-card. This data can becopied back onto the control computer from the SD-card. This must only be performed by an authorised installer,except when backups are made.Place the SD-card in the SD holder on the FUNC (CPU).SYSTEM SD Card MenuBackup data Backup data writes all the data set in the control computer to the SD-card (type .FBU). Aservice engineer may require this data so the settings can be checked on a differentcontrol computer. |
Related manuals for NiteRider F40
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine