Nivus ocm pro cf Instruction Manual

Also see for OCM PRO CF: Instruction manual

Contents

Nivus ocm pro cf Instruction Manual Manual pdf 13 page image

Instruction manualOCM Pro CF®OCM Pro CF - Rev. 09 as of 07.06.2016 page 132.6 Installation of Spare Parts and Parts subject to wear and tearWe herewith particularly emphasize that replacement parts or accessories,which are not supplied by us, are not certified by us, too. Hence, the installationand/or the use of such products may possibly be detrimental to the device’s abil-ity to work or even lead to instrument failure.Damages or measurement errors caused by the use of non-original parts andnon-original accessories are left at user’s risk. You can find spare parts or ac-cessories in chapter 14.2.7 Device VersionsThe OCM Pro CF measurement transmitter is available in different versions. Thetype key below gives a brief overview on the various possibilities.The transmitters vary in terms of the number of inputs and outputs, enclosureconstruction, data transmission options, power supply and Ex protection. Thecurrent type of device is indicated by the article number, which can be found ona weatherproof label on the bottom of the enclosure.From the type key below the type of device can be specified precisely.OCP- TypeS4M4R4F0W000INMAMIMGA4D40EOCP-Intrinsically safe sensor supply in Ex zone 1Internet communication via GPRS (GSM antenna required) (for W0l )Pow er Supply100-240 V AC / 47-63 Hz9-36 V DCATEX ApprovalsnoneInternet communication via internal ISDN modem (for W0 enclosure)Standard version w ith 2 relays, 2 mA output (galv. isolated), 1 mA input(galv. isolated w ith 2-w ire sensor supply) or for external level measurementMultifunctional version w ith 5 relays, 4 mA outputs (galv. isolated), 4 digital inputs, 5 analoginputs (1 of them galv. isolated w ith 2-w ire sensor supply), integrated 3-point step controllerw ith flush function, connecting options for up to 3 sensorsPanel mounting IP54 / IP20, no data transmission availableConstructionWall-mounting IP65Data Transm issionw ithout Internet communication (for F0 enclosure)Internet communication via Intranet (for W0 enclosure)Internet communication via internal analog modem (for W0 enclosure)Multifunctional version w ith 5 relays, 4 mA outputs (galv. isolated), 4 digital inputs, 5 analoginputs (1 of them galv. isolated w ith 2-w ire sensor supply), integrated 3-point step controllerw ith flush function, connecting options for one Radar sensors, type OFRFig. 2-2 Type key for OCM Pro CF measurement transmitters