66Making an emergency call1 If the phone is not on, switch it on.2 Press and hold the key for several seconds toready the phone for calls.3 Key in the emergency number for your present location(e.g. 911 or other official emergency number). Emergencynumbers vary by location.4 Press CallIf certain features are in use (Keyguard, call restrictions, etc.), youmay first need to turn those features off before you can make anemergency call. Consult this document and your local cellular serviceprovider.When making an emergency call, remember to give all the necessaryinformation as accurately as possible. Remember that your wirelessphone may be the only means of communication at the scene of anaccident - do not cut off the call until given permission to do so.Radio frequency (RF) signalsYour wireless handheld portable telephone is a low power radiotransmitter and receiver. When it is ON, it receives and also sendsout radio frequency (RF) signals.In August, 1996, the Federal Communications Commission (FCC)adopted RF exposure guidelines with safety levels for handheldwireless phones. Those guidelines are consistent with safetystandards previously set by both U.S. and international standardsbodies:ANSI C95.1 (1992)*, NCRP Report 86 (1986)*, ICNIRP (1996)*.Those standards were based on comprehensive and periodic evaluationsof the relevant scientific literature. For example, over 120 scientists,engineers, and physicians from universities, government healthagencies and industry reviewed the available body of research todevelop the ANSI Standard (C95.1).The design of your phone complies with the FCC guidelines(and those standards).*American National Standards Institute, National Council on RadiationProtection and Measurements; International Commission onNon-Ionizing Radiation Protection.