S e t t i n g s38 Copyright © 2005 Nokia. All rights reserved.■ PhoneSelect Menu > Settings > Phonesettings and from the followingoptions:Phone language — to set the displaylanguage of your phone. If you selectAutomatic the phone selects thelanguage according to theinformation on the SIM card.Memory status — to view the freememory and the used memory inGallery and MessagesAutomatic keyguard — to set thekeypad of your phone to lockautomatically after a preset timedelay when the phone is in thestandby mode and no function of thephone has been used. Select On, andyou can set the time from 5 secondsto 60 minutes.When the keyguard is on, calls stillmay be possible to the officialemergency number programmedinto your device.Cell info display > On — to receiveinformation from the networkoperator depending on the networkcell used (network service)Welcome note — to enter a welcomenote to be shown briefly when thephone is switched onOperator selection > Automatic — toset the phone automatically toselect one of the cellular networksavailable in your area. With Manual,you can select a network that has aroaming agreement with your homenetwork operator.Confirm SIM service actions — See”SIM services” p. 70.Help text activation — to selectwhether the phone shows help textsStart-up tone — to select whetherthe phone plays a start-up tonewhen the phone is switched on■ ConnectivityYou can connect your phone tocompatible devices using an infraredconnection. You can also define thesettings for packet data dial-upconnections.InfraredYou can set up the phone to sendand receive data through its infrared(IR) port. To use an IR connection,the device with which you want toestablish a connection must be IrDAcompliant. You can send or receivedata to or from a compatible phoneor data device (for example, acomputer) through the IR port ofyour phone.