36 Copyright © 2005 NokiaIf you want to copy a phone, fax, or pager number from Contacts to your SIMcard, select Contacts, open a contact card, scroll to the number, and selectOptions > Copy to SIM direct.Add a ringing tone for a contact card or groupYou can set a ringing tone for each contact card and group. When that contactor group member calls you, the phone plays the chosen ringing tone (if thecaller’s telephone number is sent with the call and your phone recognizes it).1 Press the Scroll key to open a contact card; or scroll right to go to groups,and select a contact group.2 Select Options > Ringing tone.A list of ringing tones opens.3 Scroll to the ringing tone you wish to use for the contact or group, andpress Select.4 To remove the ringing tone, select Default tone from the list of ringing tones.For an individual contact, the phone will always use the ringing tone that wasassigned last. If you change a group ringing tone, then the ringing tone of asingle contact that belongs to that group, the ringing tone of the single contactis used.Voice dialingYou can make a phone call by saying a voice tag that has been added to acontact card. Any spoken words can be a voice tag.When recording, hold the phone at a short distance away from your mouth.After the starting tone, say clearly the word, or words, you want to record as avoice tag.REQUIREMENTS FOR VOICE TAGSBefore using voice dialing, note the following:• Voice tags are not language-dependent. They are dependent on thespeaker's voice.• You must say the name exactly as you said it when you recorded it.• Voice tags are sensitive to background noise. Record voice tags, and usethem in a quiet environment.• Very short names are not accepted. Use long names, and avoid similarnames for different numbers.Note: Using voice tags may be difficult in a noisy environment orduring an emergency, so you should not rely solely upon voice dialingin all circumstances.
