74 Copyright © 2005 NokiaFor information on pricing, contact your service provider.To define GPRS connection settings, select Menu > Settings > Connection >GPRS, and specify these settings:GPRS connection—If you select When available and your network supportspacket data, the phone registers to the GPRS network. Also, starting an activepacket data connection, for example, to send and receive e-mail, is quicker. Ifyou select When needed, the phone will use a packet data connection only if youstart an application or action that needs it. The GPRS connection can be closedafter the applications no longer use it.If there is no GPRS coverage and you have chosen When available, the phoneperiodically tries to establish a packet data connection.Access point—The access point name is needed when you use your phone as apacket data modem to your computer.Data callOnline time—This setting affects all access points using a GSM data call. Ifthere are no actions, the data call is dropped automatically after a time-outperiod. Select User defined (in which case you enter a time) or Unlimited.ConfigurationsWhen you open a message that contains configuration settings for your phone,the message is displayed in this viewer. If you do not have any configurationsettings messages, this screen will be empty. To delete a message from thisscreen, press the Clear key.Options in the configurations viewer are Save, Message details, and Move to folder.• DATE AND TIMESelect Menu > Settings > Date and time.The Date and time settings allow you to define the date andtime used in your phone, as well as change the date and time format andseparators. You can also change the following settings:Clock type—Select Analog or Digital to change how the clock is displayed inthe standby mode. See "Clock" on page 91.Clock alarm tone—Changes the tone played when the clock reaches an alarm time.Auto time update—Allows the network to update time, date, and time zoneinformation to your phone (network service). For the auto time update settingto take effect, the phone needs to be restarted. Check any alarms because theymay be affected by the auto time update.GMT offset—Changes the time zone for the clock time.Daylight-saving—Sets daylight saving time on or off.
