82 Copyright © 2005 Nokia• VOICE COMMANDSSelect Menu > Tools > Voice com..Options in Voice commands are Add voice command, Open,New application, Playback, Change, Delete, Delete all, Help,and Exit.You can use voice commands to start applications and profiles, and to dialnumbers from Contacts, without having to look at the phone display. Yourecord a word, or words, (voice command) and then say this voice command toopen an application, activate a profile, or dial a number.You can have only one voice command per item. Any spoken words can be avoice command.When recording, hold the phone at a short distance away from your mouth.After the starting tone, say clearly the word, or words, you want to record as avoice command.Voice commands have the same requirements as voice tags. Before recording avoice command, see “Requirements for voice tags” on page 36.Note: You must say the voice command exactly as you said it whenyou recorded it. This may be difficult in, for example, a noisyenvironment or during an emergency, so you should not rely solelyupon voice commands in all circumstances.Add a voice command to an application1 In Voice commands, scroll to the application to which you are adding avoice command, and select Options > Add voice command. To add a voicecommand to a profile, you must have the Profiles folder open and a specificprofile selected.Press ’Start’, then speak after tone is displayed.2 Press Start to record a voice command.The phone sounds a starting tone, and the note Speak now is displayed.3 Say the voice command.The phone will stop recording after approximately 5 seconds. After recording,the phone plays the recorded command. Voice command saved is displayed,and a beep sounds. A symbol can be seen next to the application.If you do not want to save the recording, press Quit before the recording stops.
