Tools114NetworkThe device can automatically switch between the GSMand WCDMA networks. The GSM network is indicatedwith in the standby mode. The WCDMA network isindicated with .Network mode (shown only if supported by theoperator)—Select which network to use. If you select Dualmode, the device uses the GSM or WCDMA networkautomatically, according to the network parameters andthe roaming agreements between the network operators.Contact your network operator for more details.Operator selection—Select Automatic to set the phoneto search for and select one of the available networks, orManual to manually select the network from a list ofnetworks. If the connection to the manually selectednetwork is lost, the phone sounds an error tone and asksyou to reselect a network. The selected network must havea roaming agreement with your home network, that is, theoperator whose SIM card is in the device.Glossary: A roaming agreement is an agreementbetween two or more network service providersto enable the users of one service provider to usethe services of other service providers.Cell info display—Select On to set the device to indicatewhen it is used in a cellular network based on microcellularnetwork (MCN) technology and to activate cell inforeception.Enhancement settingsIndicators shown in the standby mode:A headset is connected.A loopset is connected.A car kit with Bluetooth technology is connected.The headset is unavailable, or a Bluetooth connectionto a headset is lost.Select Headset, Loopset, or Bluetooth Headset, and thefollowing options are available:Default profile—To set the profile that you want activatedeach time you connect a certain enhancement to thedevice. See "Set tones" on page 23.Automatic answer—To set the phone to answer anincoming call automatically after 5 seconds. If the Ringingtype is set to Beep once or Silent, automatic answer isdisabled.
