Connectivity97When the connection has been established, the noteSending data is shown.The Sent folder in Messaging does not store messages sentusing a Bluetooth connection.Icons for different devices:ComputerPhoneAudio or videoHeadsetOtherChecking the status of the Bluetooth connection• When is shown in the standby mode, a Bluetoothconnection is active.• When is blinking, the device is trying to connectto the other device.• When is shown continuously, the Bluetoothconnection is active.Pair devicesTip: To define a short name (nickname oralias), scroll to the device and select Options> Assign short name in the paired devicesview. This name helps you to recognise acertain device during device search or when adevice requests a connection.Paired devices are easier to recognise; they are indicatedby in the device search. In the Bluetooth main view,press to open the paired devices view ( ).To pair with a device, select Options > New paired device.The device starts a device search. Select the device.Exchange passcodes. See step 4 in "Send data using aBluetooth connection" on page 96.To cancel a pairing, scroll to the device, and select Options> Delete. If you want to cancel all pairings, select Options> Delete all.Tip: If you are currently connected to a deviceand delete the pairing with that device, pairingis removed immediately, but the connectionremains active.To set a device to be authorised or unauthorised, scroll toa device, and select from the following options:Set as authorised—Connections between the device andthis device can be made without your knowledge. Noseparate acceptance or authorisation is needed. Use thisstatus for your own devices, such as your compatibleheadset or PC, or devices that belong to someone youtrust. means devices that the auto-connection is set.Set as unauthorised—Connection requests from thisdevice must be accepted separately every time.
