Before use18Keypad lock (Keyguard)Use the keypad lock to prevent the keys from beingaccidentally pressed.To lock: In the standby mode, press , then .When the keys are locked, is shown on the display.To unlock: Press , then .When the keypad lock is on, calls still may be possible tothe official emergency number programmed into thedevice. Enter the emergency number, and press .To turn on the display light when the keypad lock is on,press .In this situation, calls to 110, 118 and 119 may not bepossible depending on your USIM card. In that case, pleaseset this option off and make calls with these numbers inaccordance with "Emergency calls" on page 148.Note: The keypad lock is released when thecamera lens cover opened.Standby mode shortcuts• To switch betweenapplications that areopen, press and hold .To end an application,scroll to it, and press .If memory is low, thedevice may close someapplications. The devicesaves any unsaved databefore closing anapplication, but the datais not necessarily saved inall cases.• To open the Go to list, press in the standby mode.• To open Contacts, press in the standby mode.• To open Log, press in the standby mode.• To enter a new message, press in the standby mode.• To change the profile, press , and select a profile.• To open the last dialled numbers list, press in thestandby mode.• To use voice commands, press and hold .• To establish an Web connection, press and holdin the standby mode.
