A c c e s s t h e I n t e r n e t27The security level of the network affects the settings that areshown when you tap Next.• Name of the WLAN network• WLAN signal strength• , if the WLAN network is already defined for an Internetconnection setup that you have saved in the device2. Tap Finish to save the settings. To define advanced settings, tapAdvanced. For more information, see the help on Internet settings.Tip: You may need to define advanced settings if, for example,your Internet access requires the use of proxies.■ Edit an existing WLAN connectionThe following settings are shown when you edit an existing WLANconnection or when you skip the scan for WLAN networks:Network name (SSID): — Shows an empty field or the name of thepreviously defined connection.Network mode — Select between Infrastructure and Ad hoc modes.The Infrastructure mode is used with the Internet connections.Security method: — Select None (no security), WEP (medium security),WPA pre-shared key (high security), or WPA with EAP (high security).Tip: The device supports wired equivalent privacy (WEP) with keylengths of 40, 104 bits (equal to 64, 128 bits depending on theWLAN access point manufacturer).For example, in the access point, select 40 (64) bits and enter 5characters. In the device, select correspondingly 40 bits and enterthe same 5 characters.■ Create a new cellular connectionBefore you can open an Internet connection over a cellular network,you must pair a compatible mobile phone with your device. Your deviceneeds an external modem (phone), which is connected to your devicewith Bluetooth wireless technology.