Telephone AnsweringTo answer a call, tap Answer or press . To rejecta call, tap Reject or press . To end a call press. To mute the ringing tone, tap Silence. To mutethe tone and reply with a default message, see “Othersettings” on page 42Voice diallingYou can make a phone call by saying a voice tag that hasbeen added to a contact card. Any spoken word(s) can bea voice tag.Before using voice tags, note that:• Voice tags are not language-dependent. They aredependent on the speaker's voice.• You must say the name exactly as you said it when yourecorded it.• When recording and saying the voice tags, speak up. Ifyou speak too softly, the system may not recognise thevoice tag properly.• Voice tags are sensitive to background noise. Recordvoice tags and use them in a quiet environment.• Very short names are not accepted. Use long names andavoid similar names for different numbers.To use voice dialling, press and hold or theheadset button until you hear a start tone or see a noteon the display. Say the voice tag for the number youwant to dial. To try again if the voice tag was notrecognised, press and hold down the key a fewseconds. To return to normal dialling, briefly press thekey or headset button, and press the ESC key.Telephone settingsCall diverting (network service)Call diverting allows you to direct your incoming voicecalls to another phone number. This is also known as callforwarding.1 Press , and select Tools > Settings > Call divert....A dialog opens.2 Go to the Voice calls page.3 Define the following:Divert all calls: - When activated, all incoming calls arediverted.Divert if busy: - When activated, incoming calls arediverted when you are engaged in another call.Divert if not answered: - When activated, incoming calls
