MessagingSome servers require that the user is authenticated beforee-mail can be sent.User name: - Write your user name for the SMTP server.Password: - Write your password for the SMTP server.Other pageSecurity - Define the server security protocol.Incoming e-mail port: - Enter the port number of theincoming mail server. Normally you do not have to changethe default value.Outgoing e-mail port: - Enter the port number of theoutgoing mail server. Normally you do not have to changethe default value.Access point in use: - Select whether you want to connectusing any available access point or choose the access pointyou want to use when connecting.Set as default mailbox: - If you select this check box, thismailbox will be the default mailbox.Retrieving e-mail from the mailboxTip: Delete or move e-mail regularly from yoursmartphone to free up memory space.then select the messages you wish to retrieve into yoursmartphone. Connection to a remote mailbox isestablished via a data call.You receive all messages in your remote mailbox foldersunless you specify to receive messages to your Inbox.Tip: For information on specifying e-mail retrievaloptions, see “Advanced e-mail settings” on page 50.To retrieve e-mail from a remote mailbox, pressand select E-mail > Retrieve and send. Select theappropriate command to get e-mail either from allmailboxes or from a selected mailbox. Note that if youhave e-mail in Outbox, these messages will be sentsimultaneously.Tip: If you have not specified a password in remotemailbox settings, you will be prompted for a passwordwhen initially connecting to the remote mailbox. In thedialog that opens, write the password and tap OK.To retrieve the contents of a selected message, press, and select E-mail > Retrieve e-mail contents.To disconnect from a mailbox, press and selectE-mail > Disconnect from Internet. The data call ends.Tip: To retrieve the contents of a selected e-mail
