Nokia 9110 User Manual

Also see for COMMUNICATOR 9110: Software guide Quick guide Quick guide Connection guide Software guide

Contents

Nokia 9110 User Manual Manual pdf 151 page image

Phone151 1999 Nokia Mobile Phones. All Rights Reserved.together and disconnect yourself from both calls. See ”Multiple calls” on page62. Note that not all network operators support this function.Data — When you have an alternating call active, this option changes themode of the call from voice to fax. See ”Multiple calls” on page 62.Voice — When you have an alternating call active, this option changes themode of the call from fax to voice.Play last — Plays the last recording made with the recorder. The other partywill also hear the recording.To search for phone numbersYou may fetch phone numbers from memory by the name with which the requiredphone number was stored. Note that the phone uses memory (SIM or Telephone)which is chosen in the Telephone application by pressing Menu and Select.1 Press Names.2 Key in the name of the person whom you want to call, or the first letter(s)of the name.3 Press OK. The name closest to the keyed in characters will appear.4 If the name found was not the one you searched for, scroll through thenames with or until you reach the correct one.5 To call the person, press . If the person has several phone numbers,scroll the selection frame onto the one you want and press .To view the phone number stored with the name1 When the desired name is on the display, press Detail. The phone numberis displayed. If the person has several phone numbers, scroll through thenumbers with or until you reach the correct one.2 To call the number, press .To use speed diallingSpeed dialling is a handy way to call frequently-used phone numbers. You candefine up to eight speed dial numbers in the communicator memory. Forinformation on how to set speed dials, see ”To make contact cards” on page 51.1 Key in the number of the speed dial location where you have stored theTip: If you have one active and one held call, pressSwap to make the held call active and to put thecurrently active call on hold. In this way, you mayconverse with one party without ending the othercall. You can also press to swap between thecalls if no numbers have been keyed in.