Nokia 9110 User Manual
Also see for COMMUNICATOR 9110: Software guideQuick guideQuick guideConnection guideSoftware guide
                                                                                                                                                                                              | |
Contents
| 
Computer connectivity47 1999 Nokia Mobile Phones. All Rights Reserved.2 In the Windows Program Manager, click on the “File” menu.3 Click on menu item “Run” and type a:\server in the command line.Substitute the letter “a” with the letter of the diskette drive.4 Press Enter.5 Follow the instructions shown on the screen.To use the Nokia Communicator Server with an infrared connection1 Follow the first two steps for installing the PC Suite.2 Start the Nokia Communicator Server software on the PC.3 Start the desired PC connectivity application on your communicator.Remember to set infrared as the connection type.To use the Nokia Communicator Server with a cable connection1 Connect the 9-pin end of the RS-232 adapter cable DLR-2 to the COM portof the PC, and the other end to the connector at the bottom of thecommunicator. See ”Connectors” on page 26.2 Start the Nokia Communicator Server software on the PC. Check that theCOM port reported by the software is correct.3 Start the desired PC connectivity application on your communicator.Remember to set cable as the connection type.Nokia Communicator Server for MacOsTo connect to an Apple Macintosh, you must have the Nokia CommunicatorServer application running on the Macintosh and a cable connectionestablished between the communicator and the Macintosh.The Nokia Communicator Server application is compatible with MacOS 7.5 ornewer versions, provided that they are equipped with a RS-422 serial port.Macs equipped with a USB port can be connected to a communicator using aUSB to serial adapter.To connect to an Apple Macintosh RS-422 serial port, you need to have an AppleMac modem cable (not provided by Nokia) connected to your Mac. To connectthe modem cable to the DLR-2 cable (included in the sales package), you needto have an 9M25F adapter (not provided by Nokia), because the Mac modemcable has 25 pins and the DLR-2 RS cable has only 9 pins. With this cablecombination you can use the Nokia Communicator Server software for MacOs.The PC suite connectivity software does not support MacOS.Tip: For information on how to install newsoftware on your communicator with theNokia Communicator Server, see ”Install/Remove software” on page 134. |
Related manuals for Nokia COMMUNICATOR 9110
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine