3. Replace the battery cover.4. To remove the memory card, remove the batterycover and push the memory card into the device toactivate the release mechanism. Then, gently pullthe card out of your device.Important: Do not remove the memory cardin the middle of an operation when the card is beingaccessed. Removing the card in the middle of ancharger to the adapter, and the adapter to thebottom of the device.3. Connect the power cord to the battery chargeradapter. The battery indicator bar starts scrolling onthe display. If the battery is completely discharged,it may take a few minutes before the chargingindicator is shown. The device can be used whilecharging.4. When the battery is fully charged, the bar stopsscrolling. Disconnect the charger from the device,then from the outlet.When the battery charge level is too low for operation,the device switches itself off.Switch on your device1. To switch the device on, press the power key.Get startedle:///C:/USERS/MODEServer/yukitaka/28303739/rm-89_smailer/en/issue_5/rm-89_smailer_en_5.xml Page 12 Dec 26, 2006 11:32:31 AMle:///C:/USERS/MODEServer/yukitaka/28303739/rm-89_smailer/en/issue_5/rm-89_smailer_en_5.xml Page 12 Dec 26, 2006 11:32:31 AM
