To create a new presentation, select Options > Newfile. Select Blank to create a new presentation withoutusing a template or Use template to create apresentation based on an existing template.View slide showsTo start a slide show, select Options > Presentation.Select from the following options:• Manual — Move from one slide to another manually.• Slide show — Move from one slide to anothermanually, or use the automatic slide switching. Youmust specify the duration for a slide.• Manual looped — The slide show continues from thebeginning when the last slide of a presentation hasbeen shown.• Looped slide show — The slide show continuesautomatically from the beginning when the lastslide of a presentation has been shown.To move between slides in a slide show, scroll up todisplay a previous slide and down to display the nextslide.Layout viewTo open the layout view, select the view in the middle.To enable or disable the visibility of charts, comments,tables, images, and shapes, select Options > Settings,scroll to the settings item, and press the joystick.Outline viewThe outline view is used to navigate through longpresentation documents. The view enables fast verticalscrolling, rearranging of slides, and editing of objects.To open the outline view, scroll to the view on the left.In the outline view, each slide has its own main levelentry. Under the main level there is a sublevel for eachtext field and object.To view the slide content, select Options > Expand. Tohide the content, select Options > Collapse. To collapseor expand all entries, select Options > View > Collapseall or Expand all.To change the order of slides, scroll to the slide youwant to move, and select Options > Slide > Move. ScrollOffice applicationsle:///C:/USERS/MODEServer/yukitaka/28303739/rm-89_smailer/en/issue_5/rm-89_smailer_en_5.xml Page 79 Dec 26, 2006 11:32:31 AMle:///C:/USERS/MODEServer/yukitaka/28303739/rm-89_smailer/en/issue_5/rm-89_smailer_en_5.xml Page 79 Dec 26, 2006 11:32:31 AM