Emergency callsImportant: This device operates using radio signals,wireless networks, landline networks and user-programmedfunctions. If your device supports voice calls over the internet(internet calls), activate both the internet calls and thecellular phone. The device may attempt to make emergencycalls over both the cellular networks and through yourinternet call provider if both are activated. Connections in allconditions cannot be guaranteed. You should never relysolely on any wireless device for essential communicationslike medical emergencies.To make an emergency call:1. If the device is not on, switch it on. Check for adequatesignal strength. Depending on your device, you may alsoneed to complete the following:• Insert a SIM card if your device uses one.• Remove certain call restrictions you have activated inyour device.• Change your profile from Offline or Flight profile to anactive profile.2. Press the end key as many times as needed to clear thedisplay and ready the device for calls.3. Enter the official emergency number for your presentlocation. Emergency numbers vary by location.4. Press the call key.When making an emergency call, give all the necessaryinformation as accurately as possible. Your wireless devicemay be the only means of communication at the scene of anaccident. Do not end the call until given permission to do so.Certificationinformation (SAR)This cellular device meets guidelines for exposure toradio waves.Your cellular device is a radio transmitter and receiver. It isdesigned not to exceed the limits for exposure to radio wavesrecommended by international guidelines. These guidelineswere developed by the independent scientific organizationICNIRP and include safety margins designed to assure theprotection of all persons, regardless of age and health.The exposure guidelines for cellular devices employ a unit ofmeasurement known as the Specific Absorption Rate or SAR.The SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams of tissue. Tests forSAR are conducted using standard operating positions withthe device transmitting at its highest certified power level inall tested frequency bands. The actual SAR level of anoperating device can be below the maximum value becausethe device is designed to use only the power required to reachthe network. That amount changes depending on a numberof factors such as how close you are to a network base station.Additional safety information© 2008-2009 Nokia. All rights reserved.152
