To end the remote SIM access connection from your device,select Menu > Control panel > Connectivity >Bluetooth and Remote SIM mode > Off.Wireless LANThere might be some restrictions for WLAN use in somecountries. Check with your local authorities for moreinformation.Your device can detect and connect to a wireless local areanetwork (WLAN). To use WLAN, a network must be availablein the location and your device must be connected to it.WLAN connectionsTo use a WLAN, you must create an internet access point in aWLAN. Use the access point for applications that need toconnect to the internet. A WLAN connection is establishedwhen you create a data connection using a WLAN accesspoint. The active WLAN connection is ended when you endthe data connection. You can also end the connectionmanually.You can use a WLAN during a voice call or when a packet dataconnection is active. You can only be connected to one WLANaccess point device at a time, but several applications can usethe same internet access point.When the device is in the Offline profile, you can still use aWLAN, if available. Remember to comply with any applicablesafety requirements when establishing and using a WLANconnection.If you move the device to another location within the WLANand out of range of a WLAN access point, the roamingfunctionality can automatically connect your device toanother access point that belongs to the same WLAN. As longas you remain within range of access points that belong tothe same network, your device can stay connected to thenetwork.Tip: To check the unique media access control (MAC)address that identifies your device, for example toconfigure the MAC address of your device to a WLANrouter, enter *#62209526# on the home screen. TheMAC address is displayed.See WLAN availabilityTo set your device to show wireless LAN (WLAN) availability,select Menu > Control panel > Settings andConnection > Wireless LAN > Show WLAN availability.If a WLAN is available, is displayed.WLAN wizardSelect Menu > Control panel > Connectivity > WLANwiz..The WLAN wizard helps you find and connect to a wirelessLAN (WLAN). When you open the application, your devicestarts to scan for available WLANs and lists them.Select Options and from the following:• Refresh — Update the list of available WLANs.© 2009 Nokia. All rights reserved.126
