GB 9Connecting to the TV• Connect the SCART lead between the main SCART socket onthe TV and the TV SCART socket on the Mediamaster.• Connect an RF lead from the TV/VCR output on the Media-master to the RF input socket on the TV.• Connect the TV aerial to the TV AERIAL input socket on theMediamaster.Connecting the MediamasterThere are many different types of TV/VCR and other equipmentthat you can connect to the Mediamaster.In this manual you will see some of the most common ways toconnect your equipment.If you use RF leads you will have to tune your TV and VCR to theMediamaster output channel (see page 11).If you have problems with your connections and need help, con-tact your Service Provider.RFSCARTConnecting a TV and VCRRefer to your VCR’s manual for full instructions.• Connect one SCART lead between the main SCART socket onthe TV and the TV SCART socket on the Mediamaster.• Connect another SCART lead between the VCRand the AUX SCART socket on theMediamaster.• Connect the RF lead from the RF output on theVCR to the TV aerial input on the TV.• Connect the TV aerial to the RF input socket on the VCR.VCRMediamasterSCARTSCARTRF• Connect a SCART lead between the main SCART socket onthe TV and the TV SCART socket on the Mediamaster.• Connect an RF lead from the RF output on theVCR to the TV aerial input on the TV.• Connect an RF lead from the TV/VCR output onthe Mediamaster to the RF input socket onthe VCR.• Connect the TV aerial to the TV AERIAL inputsocket on the Mediamaster.VCRMediamasterSCARTRFRFCONNECTION OF THE MEDIAMASTERIf your TV has a SCART socket, but your VCR does not