GB 35HARD DISK RECORDINGThe Slow Motion functionThe Slow Motion function is a way to watch a playback in aslower way than the normal playback speed. This function is thesame for all types of recordings. It only works in the forward di-rection, never backwards.To playback in Slow Motion mode:• First you must start the playback of a recording.• Then put it into pause mode by pressing OK.• Start the function with any of the buttons. You also usethem to control the speed, which is from +3 to -5, where +3is half of the playback speed and -5 is really slow.• Exit the Slow Motion mode and return to normal playbackspeed by pressing OK.Small steps during playbackTo move small steps forwards or backwards during a playback youcan use the double arrow buttons. The will step 20 sec. for-wards and will step 10 sec. backwards.Find a specific position within a playbackIf you have a very big recording and want to reach a specific po-sition of it, the Fast Forward or Rewind functions might be a bitinconvenient to use.Instead you can use thejump function .• Start a playback.• Select “ ” from the menu.• From line 1, Jump to position, you can select one of thepredefined times with , or enter an exact time with thenumber buttons on the remote control. Please note, that thestart position for the “jump” is the beginning of the pro-gramme. If you watch a playback for 25 minutes and fromthere select to jump e.g. 1 hour on line 1, you will reach a po-sition 1 hour into the programme, not 1h. 25 minutes.When you want to jump to an exact position, e.g. 1 hour 3 min-utes and 7 seconds, enter 010307. Always 2 figures for eachhour, minute and second. When you want to jump e.g.12 minutes and 32 seconds, enter 1232.If you enter a wrong digit, remove it with .• Line 2 and 3, Jump Forwards/Backwards: Select one of thepredefined times with , or enter an exact time with thenumber buttons on the remote control. In any of these casesyou will jump forwards or backwards from the positionwhere the playback is right now.