GB 47MAIN MENUView attributesChech position and orientation for different satellites by select-ing the line “View attributes”.Delete satelliteYou can also delete an added satellite. (This is not possible for thefactory preprogrammed satellites.)If you want to delete the satellite from which you right now arewatching a channel, you will get a screen message about howto proceed.When you delete a satellite you also delete its channels from thechannel lists.Antenna/Satellite configurationSet up and adjust motorThe procedure is the same as performed during the First Time In-stallation. Please refer to page 16.East/West limit setupYou only have to set one or both of these limits if the antenna isprevented from reaching its East/West limit positions. This couldbe the case e.g. if the antenna is mounted to close to a wall or inany similar situation.• To set these limits, select East or West limit setup and pressOK.• Adjust the antenna using the buttons.Watch the antenna movement, and when it has reached its pos-sible limit, press OK. The other limit is set in the same way (ifneeded).Remove limitsIn case you need to remove limits.When you perform this command you do not just remove the lim-its. The motor will also turn itself to the 0° (Zero) position. How-ever, next time you select a channel the motor will turn to itsproper position.TV settingsFrom here you can adjust settings concerning your TV.TV screen formatSelect your TV screen format.The 4:3 format is the standard format for most TV screens.Select 16:9 for a wide screen TV.