GB 4Time adjustmentThe time is adjusted by using cursor up/cursor down, ± 1/2 an hourat a time. You can also adjust the minutes by using cursor left/cur-sor right.• Press select to finish the first time installation and to open theNavi™ Bars Navigator.Channel search in progressThis menu will be shown as long as the Mediamaster is searchingfor TV and radio channels.All channels found will be listed on the screen.Please note that the search procedure may take a few minutes. Youcan cancel the search at any time by pressing select.When the search procedure has ended, a message will tell howmany TV and radio channels have been found.• Press select to continue.Quick guideChannel search• Select alternative “Automatic Search”.• Press select to start the search process.One antenna/one LNB configurationSelect this alternative if you have one (1) LNB mounted on the an-tenna.• Press opt to view the predefined channel.LNB typeSelect the correct LNB type for your configuration. The most com-mon values, including Universal LNB, are selectable with the cur-sor left and cursor right buttons .LNB offset voltageIf the cable from the antenna is very long, the voltage at the LNBcould be too low to change the polarisation. You can increase thevoltage to the LNB by 0.5 V.SatelliteSelect one of the preprogrammed satellites.Predefined channelSelect one of the predefined channels and adjust the antenna untilyou have a TV picture from the predefined channel visible in thebackground.• Press select to confirm all settings and continue to the channelsearch procedure.