Nokia Mediamaster 210 Owner's Manual

Also see for Mediamaster 210: Owner's manual Manual

Nokia Mediamaster 210 Owner's Manual Manual pdf 9 page image

GB 9Press once to turn the sound off/on (mute). Press and holdfor a few seconds to switch the Mediamaster in and out ofstandby mode.0 - 9 Change channel and to select individual menu options.Note: If 0 is entered as the first digit, the TV Release func-tionality is activated (see below).0 TV Release. To switch between digital TV/Radio, analogueTV and analogue satellite TV and VCR.info To display short and extended information (if transmitted)about current and next programmes. Brings up the viewingbanner in viewing mode.back Go back one level at a time within menus without storing anysettings. To toggle between present and previous TV/Radiochannel in viewing mode. Close the Navigator.select Confirm choices and selection of a highlighted item. Openthe Navigator.opt Show service options in viewing mode.txt Press to enter teletext (if available).This section describes how to operate the Mediamaster using the buttons on the remote control. Thestandby button has double functions. One function is carried out if you press the button gently once andthe other function is carried out if you hold down the button for a few seconds.Some of the functions can also be carried out using the buttons on the front panel.REMOTE CONTROLCursor upMove up in the menus andchange to the next channel incurrent channel list in view-ing mode.Cursor downMove down in the menusand change to the previouschannel in current channellist in viewing mode.Cursor leftMove left/change set-tings in menus.Decrease the volumelevel in viewingmode.Cursor rightMove right/change settings inmenus.Increase the volume level inviewing mode.The Mediamaster’s maximumlevel is controlled by the TV’spresent volume setting.The cursor key