When the device is in the offline profile, you can still useWLAN (if available). Remember to comply with anyapplicable safety requirements when establishing andusing a WLAN connection.Tip: To check the unique media access control (MAC)address that identifies your device, enter*#62209526# in the standby mode.WLAN wizardThe WLAN wizard helps you to connect to a WLAN andmanage your WLAN connections.The WLAN wizard shows the status of your WLANconnections in the active standby mode. To view theavailable options, scroll to the row showing the status,and select it.If the search finds WLANs, for example, WLAN networkfound is displayed, to create an internet access point (IAP)and start the web browser using this IAP, select the statusand Start Web browsing.If you select a secured WLAN network, you are asked toenter the relevant passcodes. To connect to a hiddennetwork, you must enter the correct network name(service set identifier, SSID). To create a new access pointfor a hidden WLAN, select New WLAN.If you are connected to a WLAN, the IAP name is displayed.To start the web browser using this IAP, select the statusand Continue Web browsing. To end the connection inthe WLAN, select the status and Disconnect WLAN.If WLAN scanning is off and you are not connected to anyWLAN, WLAN scanning off is displayed. To set scanningon and search for available WLANs, select the status andpress the scroll key.To start a search for available WLANs, select the status andSearch for WLAN. To set WLAN scanning off, select thestatus and select WLAN scanning off.To access the WLAN wizard application in the menu, press, and select Tools > WLAN wiz..WLAN internet access pointsPress , and select Tools > WLAN wiz.Select Options and from the following:● Filter WLAN networks — Filter out WLANs in the listof found networks. The selected networks are filteredout the next time the application searches for WLANs.● Details — View the details of a network shown in thelist. If you select an active connection, the connectiondetails are displayed.● Define access point — Create an internet access point(IAP) in a WLAN.● Edit access point — Edit the details of an existing IAP.You can also use connection manager to create internetaccess points. See "Active data connections", p. 99.© 2009 Nokia. All rights reserved.98
