If you want the caller’s name to be spoken when yourdevice rings, select Options > Personalise > Saycaller's name > On. The caller’s name must be found inContacts.To create a new profile, select Options > Create new.3-D tonesPress , select Tools > Utilities > 3-D tones.With 3-D tones, you can enable three-dimensional soundeffects for ringing tones. Not all ringing tones support 3-D effects.To enable the 3-D effects, select 3-D ringing toneeffects > On. To change the ringing tone, select Ringingtone and the desired ringing tone.To change the 3-D effect that is applied to the ringingtone, select Sound trajectory and the desired effect.To modify the effect, select from the following settings:● Trajectory speed — Scroll left or right to adjust thespeed at which sound moves from one direction toanother. This setting is not available for all ringingtones.● Reverberation — Select the type of echo.● Doppler effect — Select On to have the ringing tonesound higher when you are closer to your device, andlower when you are farther away. When you get closerto the device, the ringing tone seems to becomehigher, and lower when you move away from it. Thissetting is not available for all ringing tones.To listen to the ringing tone with the 3-D effect, selectOptions > Play tone. If you enable the 3-D tones but donot select any 3-D effect, stereo widening is applied to theringing tone.To adjust the ringing tone volume, select Tools >Profiles > Options > Personalise > Ringingvolume.Modify the standby modeTo change the look of the standby mode, press , andselect Tools > Settings > General >Personalisation > Standby mode > Standby theme.© 2009 Nokia. All rights reserved. 33
