Nokia N80 User Manual

Also see for N 80: User guide User guide Software guide Supplementary guide User guide

Contents

Nokia N80 User Manual Manual pdf 39 page image

Media applications39Copyright © 2006 Nokia. All rights reserved.with 3GPP standards and, therefore, is not supported bythis device.Play video clips1 To play a media file stored in device memory, or on thememory card (if inserted), select Options > Open andfrom the following:Most recent clips—to play one of the last six filesplayed in RealPlyr.Saved clip—to play a file saved in Gallery.See ‘Gallery’, p. 30.2 Scroll to a file, and press to play the file.Tip! To view a video clip in full screen mode, press. To change back to normal screen mode, press any key.Shortcuts during play:• To fast forward, press and hold .• To rewind through the media file, press and hold .• To mute the sound, press and hold until isdisplayed. To turn on the sound, press and holduntil you see .Stream content over the airMany service providers require you to use an Internetaccess point (IAP) for your default access point. Otherservice providers allow you to use a WAP access point.The access points may be configured when you first startyour device.Contact your service provider for more information.In RealPlyr., you can only open an rtsp:// URL address.However, RealPlyr. recognizes an http link to a .ram file.To stream content over the air, select a streaming linksaved in Gallery, on a Web page, or received in a textmessage or multimedia message. Before live contentbegins streaming, your device connects to the site andstarts loading the content. The content is not saved inyour device.Receive RealPlayer settingsYou may receive RealPlyr. settings in a special textmessage from the network operator or service provider.See ‘Data and settings’, p. 48. For more information,contact your network operator or service provider.Change the RealPlayer settingsSelect Options > Settings and from the following:Video—to have RealPlyr. automatically repeat video clipsafter they finish playing.Connection—to select whether to use a proxy server,change the default access point, and set the port range