Settings119phone lines. Select which phone line you want to use formaking calls and sending text messages. Calls on both linescan be answered irrespective of the selected line. If youselect Line 2 and have not subscribed to this networkservice, you will not be able to make calls. When line 2 isselected, is shown in the standby mode.Tip! To switch between the phone lines, press andhold in the standby mode.Line change—To prevent line selection (network service),select Disable if supported by your SIM card. To changethis setting, you need the PIN2 code.Call divertCall divert allows you to divert your incoming calls to yourvoice mailbox or another phone number. For details,contact your service provider.Select which calls you want to divert and the desireddiverting option. To divert voice calls when your number isbusy or when you reject incoming calls, select If busy. Setthe option on (Activate) or off (Cancel), or check whetherthe option is activated (Check status).Several diverting options can be active at the same time.When all calls are diverted, is shown in thestandby mode.Call barring and call diverting cannot be active at the sametime.Call barringCall barring (network service) allows you to restrict thecalls that you make or receive with the device. To changethe settings, you need the barring password from yourservice provider.Select the desired barring option, and set it on (Activate)or off (Cancel), or check whether the option is active(Check status). Call barring affects all calls, includingdata calls.Call barring and call diverting cannot be active at the sametime.When calls are barred, calls may be possible to certainofficial emergency numbers.NetworkYour device can automatically switch between the GSMand UMTS networks. The GSM network is indicated within the standby mode. The UMTS network is indicatedwith .Network mode (shown only if supported by the networkservice provider)—Select which network to use. If youselect Dual mode, the device uses the GSM or UMTS