Nokia N81 User Manual

Contents

Nokia N81 User Manual Manual pdf 61 page image

Camera61saved in the .mp4 file format in a multimedia message.You can also send the video clip to a call recipientduring an active call. Select Send to caller.• To upload the video clip to a compatible online album,select Post to (available only if you have set up anaccount for a compatible online album. See ‘Shareonline’, p. 51).Video settingsThere are two kinds of settings for the video recorder:Video setup and main settings. To adjust Video setupsettings, see ‘Adjust color and lighting’, p. 56. The setupsettings return to the default settings after you close thecamera, but the main settings remain the same until youchange them again. To change the main settings, selectOptions > Settings and from the following:Video quality—Set the quality of the video clip to High(best quality for long term usage and playback on acompatible TV or PC and handset), Normal (standardquality for playback through your handset), or Sharing(limited video clip size to send using a multimediamessage). If you want to view the video on a compatible TVor PC, select High, which has QVGA resolution (320x240)and the .mp4 file format. To send the video clip throughMMS, select Sharing (QCIF resolution, .3gp file format).The size of the video clip recorded with Sharing is limitedto 300 KB (about 20 seconds in duration) so that it can beconveniently sent as a multimedia message to acompatible device.Audio recording—Select Mute if you do not want torecord sound.Add to album—Select whether you want to add therecorded video clip to a certain album in Gallery. SelectYes to open a list of available albums.Show captured video—Select whether you want the firstframe of the recorded video clip to be shown on the displayafter the recording stops. Select Play from the activetoolbar (main camera) or Options > Play (secondarycamera) to view the video clip.Default video name—Define the default name for thecaptured video clips.Memory in use—Define the default memory store.Restore camera settings—Select Yes to return the defaultvalues to the camera settings.