Connections74Device icons: computer, phone, audio orvideo device, and other device.To interrupt the search, select Stop.3 Select the device with which you want to connect.4 If the other device requires pairing before data can betransmitted, a tone sounds, and you are asked to entera passcode. See ‘Pair devices’, p. 74.5 When the connection has been established, Sendingdata is shown.Tip! When searching for devices, some devices mayshow only the unique address (device address). To findthe unique address of your device, enter the code*#2820# in the standby mode.Pair devicesTo pair with compatible devices and view your paireddevices, in the Bluetooth application main view, press .Before pairing, create your own passcode (1-16 digits), andagree with the owner of the other device to use the samecode. Devices that do not have a user interface have afactory-set passcode. The passcode is used only once.1 To pair with a device, select Options > New paireddevice. Devices with Bluetooth connectivity withinrange start to appear on the display.2 Select the device, and enter the passcode. The samepasscode must be entered on the other device as well.Some audio enhancements connect automatically to yourdevice after pairing. Otherwise, scroll to the enhancement,and select Options > Connect to audio device.Paired devices are indicated by in the device search.To set a device as authorized or unauthorized, scroll to adevice, and select from the following options:Set as authorised—Connections between your device andthis device can be made without your knowledge. Noseparate acceptance or authorization is needed. Use thisstatus for your own devices, such as your compatibleheadset or PC, or devices that belong to someone you trust.indicates authorized devices in the paired devices view.Set as unauthorised—Connection requests from thisdevice must be accepted separately every time.To cancel a pairing, scroll to the device, and selectOptions > Delete. If you want to cancel all pairings, selectOptions > Delete all.Receive data using BluetoothconnectivityWhen you receive data through Bluetooth connectivity, atone sounds, and you are asked if you want to accept themessage. If you accept, is shown, and the item isplaced in the Inbox folder in Messaging. Messages