both lines can be answered irrespective of theselected line. If you select Line 2 and have notsubscribed to this network service, you are notable to make calls. When line 2 is selected, isshown in the standby mode.● Line change — To prevent line selection(network service), select Disable if supported byyour SIM card. To change this setting, you needthe PIN2 code.Call divertPress , and select Tools > Settings > Phone >Call divert.Call divert allows you to divert incoming calls toyour voice mailbox or another phone number. Fordetails, contact your service provider.To activate call divert, select Activate. To checkwhether the option is active, select Check status.Several diverting options can be active at the sametime. When all calls are diverted, is shown inthe standby mode.Call barring and call diverting cannot be active atthe same time.Call barringPress , and select Tools > Settings > Phone >Call barring.Call barring (network service) allows you to restrictthe calls that you make or receive with the device.For example, you can restrict all outgoinginternational calls or incoming calls when you areabroad. To change the settings, you need thebarring password from your service provider.Call barring and call diverting cannot be active atthe same time.When calls are barred, calls may be possible tocertain official emergency numbers.Voice call barringSelect the desired barring option, and set it on(Activate) or off (Deactivate), or check whether theoption is active (Check status). Call barring affectsall calls, including data calls.Internet call barringTo select whether anonymous calls are allowedfrom the internet, set Anonymous call barring onor off.Network settingsYour device can automatically switch between theGSM and UMTS networks. The GSM network isindicated with in the standby mode. The UMTSnetwork is indicated with .Press , and select Tools > Settings > Phone >Network and from the following: 161 Settings
