Receive data using BluetoothconnectivityWhen you receive data through Bluetoothconnectivity, a tone sounds, and you are asked ifyou want to accept the message. If you accept,is displayed, and the item is placed in the Inboxfolder in Messaging. Messages received throughBluetooth connectivity are indicated by .Tip: If your device notifies you that thememory is full when you try to receive datathrough Bluetooth connectivity, changememory card as the memory where the datais stored.Block devicesPress , and select Tools > Bluetooth.To block a device from establishing a Bluetoothconnection to your device, scroll right to openPaired devices. Select a device you want to blockand Options > Block.To unblock a device, scroll right to Blockeddevices, select a device, and Options > Delete. Tounblock all blocked devices, select Options >Delete all.If you reject a pairing request from another device,you are asked if you want to block all futureconnection requests from this device. If you acceptthe query, the remote device is added to the list ofblocked devices.Remote SIM modeBefore the remote SIM mode can be activated, thetwo devices must be paired and the pairing initiatedfrom the other device. When pairing, use a 16-digitpasscode, and set the other device as authorised.To use the remote SIM mode with a compatible carkit enhancement, activate Bluetooth connectivity,and enable the use of the remote SIM mode withyour device. Activate the remote SIM mode from theother device.When the remote SIM mode is on in your device,Remote SIM mode is displayed in the standbymode. The connection to the wireless network isturned off, as indicated by in the signal strengthindicator area, and you cannot use SIM card servicesor features requiring cellular network coverage.When the wireless device is in the remote SIM mode,you can only use a compatible connectedenhancement, such as a car kit, to make or receivecalls. Your wireless device will not make any callswhile in this mode, except to the emergencynumbers programmed into your device. To makecalls from your device, you must leave the remoteSIM mode. If the device is locked, enter the lock codeto unlock it. 43 Connections
