change the setup settings after selecting a scene ifneeded.Video settingsTo change the main settings, in the video mode,select Options > Settings and from the following:● Video quality — Set the quality of the video clip.Select Sharing, if you want to send the video clipusing a multimedia message. The clip is recordedwith QCIF resolution, in 3GPP format, and the sizeis limited to 300 kB (approximately 30 seconds).You may not be able to send video clips saved inthe MPEG-4 format in a multimedia message.● Record location — To add GPS locationcoordinates to each file, select On. Receiving theGPS signal may take time or the signal may notbe available.● Audio recording — Select whether to recordsound.● Add to album — Add the recorded video clip toan album in Photos.● Show captured video — Select to view the firstframe of the recorded video clip after therecording stops. To view the entire video clip,select Play from the active toolbar (main camera)or Options > Play (secondary camera).● Default video name — Enter the default namefor captured video clips.● Memory in use — Select where you want tostore your video clips.● Restore camera settings — Restore the camerasettings to default values.85 Camera
