Nokia N93i User Manual

Also see for N93i: User guide User guide User guide Service schematics

Contents

Nokia N93i User Manual Manual pdf 109 page image

Copyright © 2006 Nokia. All rights reserved.Settings98CallSend my caller ID — Select Yes or No to set your phonenumber to be seen by or hidden from the person to whomyou are calling. Otherwise, the value may be set by yourservice provider when you make subscribe to the networkservice. Set by network is displayed.Call waiting — If you have activated call waiting (networkservice), the network notifies you of a new incoming callwhile you have a call in progress. To check whether thefunction is active, select Check status. To set the functionon or off, select Activate or Cancel.Reject call with SMS — Select Yes to send a text messageto a caller informing why you could not answer the call.See "Answer or reject a call", on page 52.Message text — Write text to be sent in a text messagewhen you reject a call.Image in video call — Select a still image to be displayedinstead of video.Automatic redial — Select On, and your device makes amaximum of 10 attempts to connect the call after anunsuccessful call attempt. To stop automatic redialing,press .Summary after call — Activate this setting if you want thedevice to briefly display the approximate duration of thelast call.Speed dialling — Select On, and the numbers assigned tothe speed dialing keys ( — ) can be dialed by pressingand holding the key. See also "Speed dial a phone number",on page 47.Anykey answer — Select On. To answer an incoming call,briefly press any keypad key, except , , , and.Line in use — This setting (network service) is shown onlyif the SIM card supports two subscriber numbers, that is,two phone lines. Select which phone line you want to usefor making calls and sending text messages. Calls on bothlines can be answered irrespective of the selected line. Ifyou select Line 2 and have not subscribed to this networkservice, you will not be able to make calls. When line 2 isselected, is shown in the standby mode.Tip! To switch between the phone lines, press andhold in the standby mode.Line change — To prevent line selection (network service),select Disable if supported by your SIM card. To changethis setting, you need the PIN2 code.