select Options > Edit. Scroll to the desired field, andenter the information.You can sort your landmarks into preset categories,and create new categories. To edit and create newlandmark categories, scroll right in Landmarks, andselect Options > Edit categories.To add a landmark to a category, scroll to the landmarkin Landmarks, and select Options > Add tocategory. Scroll to each category to which you want toadd the landmark, and select it.To send one or several landmarks to a compatibledevice, select Options > Send, and the method. Yourreceived landmarks are placed in the Inbox folder inMessaging.GPS dataGPS data is designed to provide route guidanceinformation to a selected destination, positioninformation about your current location, and travelinginformation, such as the approximate distance to thedestination and approximate duration of travel.Press , and select Tools > Connectivity > GPSdata.The coordinates in the GPS are expressed in degreesand decimal degrees format using the internationalWGS-84 coordinate system.To use GPS data, the GPS receiver of your device mustinitially receive position information from at least foursatellites to calculate the coordinates of your location.When the initial calculation has been made, it may bepossible to continue calculating the coordinates ofyour location with three satellites. However, theaccuracy is generally better when more satellites arefound.Route guidancePress , and select Tools > Connectivity > GPSdata > Navigation.Start the route guidance outdoors. If started indoors,the GPS receiver may not receive the necessaryinformation from the satellites.Route guidance uses a rotating compass on the devicedisplay. A red ball shows the direction to thedestination, and the approximate distance to it isshown inside the compass ring.Route guidance is designed to show the straightestroute and the shortest distance to the destination,measured in a straight line. Any obstacles on the route,such as buildings and natural obstacles, are ignored.Differences in altitude are not taken into account whencalculating the distance. Route guidance is active onlywhen you move.To set your trip destination, select Options > Setdestination and a landmark as the destination, or90 Positioning (GPS)
