Safety 1-15 1998 Nordson CorporationAll rights reserved 106 588DIssued 8/98Manual 1-12Table 1-2 contains the text of the safety label on this equipment. Thesafety label is provided to help you operate and maintain your equipmentsafely. See Figure 1-1 for the location of the safety label.Table 1-2 Safety LabelItem Part Description1. - - - - - - WARNING HIGH PRESSURE DEVICERead instruction manual before operation and observe allwarnings. INJECTION HAZARDAirless spray painting equipment can cause serious injury if thespray penetrates the skin. Do not point the gun at anyone or anypart of the body. In case of penetration, adequate medical aidmust be immediately obtained. COMPONENT RUPTUREThis system is capable of producing high pressure. To avoidrupture and injury, do not operate this pump at a pressure higherthan the rated maximum working pressure of any component inthe system (including but not limited to spray guns, hoses, hoseconnections and heaters). FIREStatic voltage is developed by airless spraying. The pump,associated system, and object being sprayed must be groundedto prevent static discharge sparks which could start a fire. SERVICINGBefore servicing, cleaning, or removal of any part, set trigger lockon gun, and always shut off power source; then carefully releasepressure in fluid portions of the system.12. Safety Label