Operation 5-7Part 1614575-01 2019 Nordson CorporationElectrostatic SettingsElectrostatic output can be set to Select Charge mode (predefined),Custom mode, or Classic mode. Refer to the Functions section on page 4-7to program Custom or Classic mode using the F03 function.Select Charge ModeSelect Charge mode provides three predefined electrostatic settings forcommon paint applications. These settings cannot be changed. The LEDsabove the Select Charge mode buttons indicate the selected mode.NOTE: If the operator tries to adjust kV or μA values while a Select Chargemode is selected, the controller will switch to Custom or Classic mode.Refer to Table 5-5 for mode settings.Table 5-5 Select Charge Mode SettingsController Icon Description Setting ValuesMode 1 Re-coat: Reduces back ionization when re-coatinga part that has already been coated and cured. 100 kV, 15 μAMode 2 Metallics: Reduces voltage to spray gun toprevent separation of metallic flake from basematerial. 50 kV, 50 μAMode 3 Deep Recesses: Improves coating of insidecorners. 100 kV, 60 μA
