Operation4-8Part 1604870-05  2018 Nordson CorporationEncore Nano Feedback Control Mode (NFC)To configure the controller for the NFC function, set the Electrostatic Control(F03) to the Custom mode (Custom= 00).Use the NFC mode to adjust and set both kV and μA in lower value range.See Function Settings on Controller Configuration section on page 4-20.A NFC Range and SettingsNFC mode allows the user to adjust the μA setting in increments of 0.1 μAbelow the value of 10.0 μA.For example, the user can set the μA settings from 12, 11, 10, 9.9, 9.8, 9.7,….. through 0.1.kV NFC Range and SettingsNFC mode allows the user to adjust the kV setting in increments of 1 kVbelow the value of 25 kV.For example, the user can set the kV settings from 25, 24, 23, 22, …..through 0.Classic ModeClassic Mode allows you to control kV (STD) output or μA (AFC) output,but not both at the same time.NOTE: To use Classic mode, the controller must be configured underfunction setting F03. Refer to Controller Configuration on page 4-20.Adjust kV: Classic Mode: Standard (STD)NOTE: Use the Classic Standard mode to adjust and set kV. μA cannot beadjusted in standard mode.1. To adjust the kV setpoint, press the kV button. The button LED lights toshow that kV is selected.2. Turn the Rotary Knob to increase or decrease the kV setpoint. Thesetpoint automatically saves in 3 seconds or when any button ispressed.

Intended Use

Fire Safety

Description System Components 3

Pump Panel

Pump Panel Components

HD Pump Manifold Components

Solenoid and Flow Control Valve Functions

Spray Gun Controller

Installation Manifold and Pump 9

Pump Control Board

Switches and Indicators

Control Board Configuration

Configuration Procedure

Air and Powder Tubing Connections

System Diagram

Pneumatic Diagram Dual Pump/Spray Gun System

Wiring Diagram Dual Pump/Spray Gun System

Operation

Nordson Corporation

Flow Control Valve Cleaning

Flow Control Valve Replacement

Dual Pump/Spray Gun System with Stand

Manifold

Air and Powder Tubing

PCA Replacement Kit

Jackson Street Amherst, OH

Contact Us

Nordson Encore HD Customer Product Manual

Safety

Description

Pump Components

Theory of Operation

Purging

Pump Port Functions

Specifications

Installation

Maintenance

Troubleshooting

Delivery Check

Bubble Test for Color-on-Demand (COD System

Repair

Pump Disassembly

Pump Assembly

Pinch Valve Replacement

Parts

Spare Parts

Air and Powder Tubing Part Numbers

Encore HD

Personal Safety

Grounding

Connections

Manifold Solenoid Valve Functions

Manifold Wiring Diagram

Maintenance and Repair

Pump Module Assembly

Pump Module Unit

Pump Module Manifold

Factory Connections

Pump Cabinet Dimensions

System Air Supply and Grounding Connections

Replacing Grounding Strip

Installing or Replacing the Pump Module

Pump Cabinet Configurations

Pump Cabinet Parts

Qualified Personnel

System Setup

System Connections

Controller Connections

Initial Startup

Standby Button

Factory Set Presets

Changing a Factory Configured Preset or Setpoint Value

Electrostatic Settings

Custom Mode

Classic Mode

Help Codes

Assist Air Setting, Fast Flow Setting, and Software Versions

Powder Flow Settings

XT Powder Flow Settings

Color Change Purge

Color-on-Demand (COD) System Purge

Controller Configuration

Saving and Loading Preset and Function Settings

HD System Shutdown

Help Code Troubleshooting Chart

General Troubleshooting Chart

Re-Zero Procedure

Controller Interconnect Cable Test

Wiring Diagram

Controller Parts

Controller Parts List

Rail Mount Exploded View

Encore HD 1612632