Administration overview / 23Entering namesLetters and numbers can be entered as part of a name forvarious settings. The method of entering a name is always thesame.Begin with a setting that prompts you to enter a name. Thedisplay shows a cursor ( - ) to indicate where you can enter thenext character. To enter a name:1 . Press the button on the dial pad with the printed letter ornumber that you want.Each time that you press the button, a new character isshown on the display. For example, the button for thenumber 3 has the letters D, E, and F, where:D is shown after the first pressE is shown after the second pressF is shown after the third press3 is shown after the fourth pressD is shown again after the fifth press.(Letters are always shown in upper case.)2. When the character that you want is displayed,press --> or Q to ,move the cursor to the next characterposition.ORIf you want to correct a character entered by mistake,press h or @ until the cursor is positioned beneath thecharacter that you want to correct.ORIf you want to move the cursor back and delete a character,press BKSP.3. Repeat step 1 for the remaining characters.Modular DR5 System Coordinator Guide
