Norstar telephones / 59Norstar default button assignmentsDuring Startup, the Installer chooses one of four defaulttemplates: Square, Centrex, Hybrid, or PBX. Default features areassigned automatically to the programmable buttons on Norstartelephones, and vary with the template and the telephone. Thedefault features are listed in the tables in this chapter.Note: Norstar telephones are shipped from the factory with thebutton caps‘in place for the Square template.Rules of default button assignmentLine and Intercom buttons are assigned by default templates andcan be changed in Configuration programming. Handsfree/Muteand Answer buttons are not assigned by default. If these featuresare defined, however, they are automatically assigned to specificbuttons, as described on this and the following page. None ofthese buttons can be assigned to M7100 Telephones.Handsfree/MuteThis feature appears on the bottom right-hand button (the bottombutton on the M7208 Telephone), moving the Intercom button(s)up one position.IntercomEach telephone can have up to eight Intercom buttons. Theyappear above the Handsfree/Mute button at the bottomright-hand position on your telephone (the bottom button on theM7208 Telephone).AnswerEach telephone can have up to four Answer buttons. Theyappear above Intercom buttons in the right column and continueup from the bottom in the left column, replacing the features onthose buttons. (On the M7208 Telephone, Answer buttonsappear above Intercom buttons and below external line buttonsin a single column.)Modular DR5 Installer Guide
