Nortek 212iLW? 242iLW Installation & Programming Manual
                            | |
20 6-050700 X2212iLW & 242iLW Standalone KeypadInstallation & Programming ManualCommand/Action Keys to Enter/DetailsCommand 32.Change KeypadParameters32 # parameter # value # ✱ ✱Parameter Value0 – Duress Output Duration 1 – 255 (default = 5)1 – Panic Output Duration 1 – 255 (default = 5)2 – Error Lockout Threshold 1 – 50 (default = 3)3 – Error Lockout Duration 1 – 255 (default = 107.4 Programming UsersCommand/Action Keys to Enter/DetailsMaster CodeUser #1 is the master code; it can access allcommands in program mode. The default codeis 1234. The master code can be programmedwith Command 50 or Command 60 as astandard user only.Supervisor CodeUser #2, when programmed, is the supervisorcode. The supervisor can access program mode,but is limited to adding and deleting users,as well as enabling or disabling users. Thesupervisor code can’t change, delete, or disablethe master code or supervisor code itself.Add Standard User(short version) user location # code ✱ code ✱Add User withSpecific UnlockTimeunlock time # user location # code ✱ code ✱(This command is used to program a user witha specific unlock. This user activates the virtuallock output.)Delete User user location # ✱ ✱ |
Related manuals for Nortek 212iLW? 242iLW
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine