Nortel 1000 Installation And Commissioning Manual

Also see for 1000 Con?guration guide: Brochure Reference User manual Overview User guide

Contents

Nortel 1000 Installation And Commissioning Manual Manual pdf 189 page image

ISL installation 189Note 2: Forced Data Terminal Ready (DTR) automatically reinitiates adropped hot line call.ISL installationUse Procedure 22 "Install ISL in dedicated mode" (page 189) to install ISLin dedicated mode. Use Procedure 23 "Install ISL in shared mode" (page189) to install ISL in shared mode.Modem paths must have individual configurations: route data blocks, trunks,and routes.Install ISL in dedicated mode (digital and analog)DTI or PRI should already be up and running.Procedure 22Install ISL in dedicated modeStep Action1 In LD17, configure ISL for dedicated mode.USR = ISLDISLM = Number of trunks handled by this D-channel (1-382)2 In LD16, configure the Route Data Block to map out the softwareparameters for these trunks.3 Install the modem with leased line functionality.4 In LD14, reassign old trunks to the routes just built in LD16.5 In LD16, out the old DTI route. A separate Route Data Block shouldbe built for Leased Line, or to accommodate the dialing plan for adedicated modem.—End—Install ISL in shared modeDTI or PRI should already be up and running.Procedure 23Install ISL in shared modeStep Action1 In LD14, remove the PRI trunks.2 In LD17, configure ISL for dedicated mode.Nortel Communication Server 1000ISDN Primary Rate Interface Installation and CommissioningNN43001-301 02.03 StandardRelease 5.5 7 December 2007Copyright © 2003-2007, Nortel Networks.