104 Configure an E1/T1 cardPrompt Response DescriptionDES DPNSS Designator field for trunk.... ...DDSL 0 - 15 DASS2/DPNSS D-channel logical port number, entered inLD 74.SIGL DPN/DAS DPN = DPNSS signalingDAS = DASS signalingCUST xx Customer number, as defined in LD 15.NCOS (0) - 99 Network Class of Service group.... ...RTMB 0-511 1-4000 Route number and member number.Range is the same as that for CS 1000E system.... ...TGAR 0 - (1) - 31 Trunk Group Access Restriction. The default "1"automatically blocks direct access.... ...CLS aaaa Class of Service.... ...--End--Enable PRI spansFor every span on the E1/T1 card, enable the NTBK51AA/NTBK51CA cardor the NTAK93AB daughterboard and enable the clock controller.If you use the NTBK51AA/NTBK51CA daughterboard, follow the proceduredescribed in Procedure 33 “Enabling the NTBK51AA/NTBK51CAdaughterboard” (page 104) to enable the PRI spans through software.If you use the NTAK93AB daughterboard, follow the procedure describedin Procedure 34 “Enabling the NTAK93AB daughterboard” (page 105) toenable the DPNSS/DASS spans through software.To enable the clock controller, follow the procedure described in Procedure35 “Enabling the clock controller” (page 105).Procedure 33Enabling the NTBK51AA/NTBK51CA daughterboardNortel Communication Server 1000Media Gateway 1000E PRI Gateway Installation and CommissioningNN43041-311 04.01 4 June 2010Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
