68 Connect PRI Gateway componentsProcedure 9Connecting a Media Gateway Controller to the ELAN subnetStep Action1 Connect a standard CAT5 patch cable to the ELAN networkinterface on the adaptor.2 Connect the other end of the standard CAT5 patch cable to anRJ-45 ELAN network interface on the Layer 2 switch.--End--Connect a Media Gateway Controller to the TLAN subnetFollow the steps in Procedure 10 “Connecting a Media Gateway Controllerto the TLAN subnet” (page 68) to connect an MGC to the TLAN subnet.Procedure 10Connecting a Media Gateway Controller to the TLAN subnetStep Action1 Connect a standard CAT5 patch cable to the TLAN networkinterface on the adaptor.2 Connect the other end of the standard CAT5 patch cable to anRJ-45 TLAN network interface on the Layer 2 switch.--End--Connect a Media Gateway Controller to the E1/T1 cardFollow the steps in Procedure 11 “Connecting a Media Gateway Controllerto the E1/T1 card” (page 68) to connect the MGC to the E1/T1 card.Procedure 11Connecting a Media Gateway Controller to the E1/T1 cardStep Action1 Connect a RJ-45 shielded Ethernet cable to the ELANconnection.2 Connect the RJ-45 shielded Ethernet cable to the CE ports onthe MGC.--End--Nortel Communication Server 1000Media Gateway 1000E PRI Gateway Installation and CommissioningNN43041-311 04.01 4 June 2010Copyright © 2007-2010 Nortel Networks. All Rights Reserved.
