Using the Console Interface309985-C Rev 00 3-49Filter Untagged Frames Sets this port to filter (discard) all received untagged frames.Restriction: If this port is a gigabit port or a port that is a protocol-basedVLAN member, you cannot set this field value to No. This restriction alsoapplies if this port is a trunk member with a gigabit port or a port that is aprotocol-based VLAN member.Default NoRange No, YesFilter Unregistered Frames Sets this port to filter (discard) all received unregistered packets.Default NoRange No, YesPort Name The default port name (with associated stack unit number whenconfigured) assigned to this port. You can change this field to any namethat is up to 16 characters long.Default Unit x, Port xRange Any ASCII string of up to 16 printable charactersPVID Associates this port with a specific VLAN. For example, a port with aPVID of 3 assigns all untagged frames received on this port to VLAN 3.Default 1Range 1 to 4094Port Priority Prioritizes the order in which the switch forwards packets received onspecified ports (see “IEEE 802.1p Prioritizing” on page 1-59).Default 0Range 0 to 7Tagging Allows you to assign VLAN Port Membership tagging options to this port,as follows:• Untagged Access: Any VLAN that this port is a member of will not be802.1Q tagged.• Tagged Trunk: Any VLAN that this port is a member of will be 802.1Qtagged.Restriction: If this port is a gigabit port or a port that is a protocol-basedVLAN member, you cannot set this field value to Untagged Access. Thisrestriction also applies if this port is a trunk member with a gigabit port ora port that is a protocol-based VLAN member.(continued)Table 3-16. VLAN Port Configuration Screen Fields (continued)Field Description
