Using the BayStack 410-24T 10BASE-T Switch1-66 309985-C Rev 00Trunk Configuration Screen ExamplesThis section shows examples of the MultiLink Trunk configuration screens for theclient/server configuration example shown in Figure 1-41 on page 1-65. Thescreens show how you could set up the trunk configuration screens for switchesS1 to S4. See “Spanning Tree Considerations for MultiLink Trunks” onpage 1-78, and “MultiLink Trunk Configuration” on page 3-58 for moreinformation.Trunk Configuration Screen for Switch S1Switch S1 is set up with five trunk configurations: T1, T2, T3, T4, and T5.Setting Up the Trunk Configuration for S1:To set up the trunk configuration, choose MultiLink Trunk Configuration(or press t) from the MultiLink Trunk Configuration Menu screen (Figure 1-42).Figure 1-42. Choosing the MultiLink Trunk Configuration ScreenMultiLink Trunk Configuration MenuMultiLink Trunk Configuration...MultiLink Trunk Utilization...Return to Switch Configuration MenuUse arrow keys to highlight option, press or to select option.Press Ctrl-R to return to previous menu. Press Ctrl-C to return to Main Menu.
