Using the Console Interface309985-C Rev 00 3-73IGMP ConfigurationFigure 3-32 shows an example of the IGMP Configuration screen in a stackedconfiguration. When installed as a standalone switch, the screen does not displaythe Unit # field designation.In this example, switch ports 8 and 14 of unit 1, ports 2 and 6 of unit 2, and port 16of unit 4 are set to receive all IP multicast-related traffic. The configured ports areVLAN port members of VLAN 5, and are called Static Router Ports.Choose IGMP Configuration (or press g) from the IGMP Configuration Menuscreen to open the IGMP Configuration screen.Display Multicast GroupMembership...Displays the Multicast Group Membership screen (see “Multicast GroupMembership” on page 3-77). This screen allows you to view all IP multicastaddresses that are active in the current LAN.Return to SwitchConfiguration MenuExits the IGMP Configuration Menu screen and displays the SwitchConfiguration Menu screen.Table 3-27. IGMP Configuration Menu Screen Options (continued)Option Description