27Logging onFollow this procedure to log on to the network. If the Centrex IP ClientManager (CICM) is set up as part of a group of CICMs, you can choosewhich CICM to connect to. After you select a gateway, the terminal directsitself at that CICM and the Username screen appears.If a firmware upgrade for the IP Phone is available, the system prompts youto upgrade when you log on. If the firmware level is between the minimumand maximum level set by the administrator, Yes and No options appear onthe soft keys. If the terminal is below the minimum level, the only optionavailable is Yes. You cannot log on until you perform the upgrade.To perform an upgrade, see "Performing a firmware upgrade" (page 77).Step Action1 If the Selective Gateway Login feature is configured on your system,navigate through the list to select the gateway.2 When the gateway you want appears, press Ok, or start enteringyour username.If the Username screen appears when you start to enter your username, the characters you already entered appear at the beginningof the Username field.3 If you make a mistake, press Clear to clear the field, and then enterthe user name again.If your user name is too long for the display (longer than 15characters), the digits scroll to the left and an ellipsis appears tothe left of the user name.4 Press Ok, or press the send key.The Password screen appears.5 Enter your password. For security, the password characters aredisplayed as asterisks (*).Carrier VoIPNortel IP Phone 1140E User GuideNN10300-023 01.03 Standard(I)SN09U 13 April 2007Copyright © 2007, Nortel Networks Nortel Networks Confidential.
